5 Ways to Maintain Your Swimming Pool

Author: A.I.M. For Real Estate Inspections | | Categories: Builder’s Warranty Inspections , Buyer’s Inspections , Commercial Property Inspections , Deck Inspection , Electrical Inspection , Fireplace Inspection , Home Exterior Inspection , Home Inspection , HVAC System Inspection , Licensed Foundation Inspector , New Construction Phase Inspections , Patio Inspection , Plumbing Inspection , Pool Inspections , Pre-Listing Inspections , Re-Inspections , Real Estate Inspection , Roofing System Inspection , San Antonio Home Inspectors , Spa Inspections , Sprinkler Inspections , Structural Components

swimming-pool-ph-1080x675.jpg

A swimming pool is an enjoyable feature to have at your home. However, it does take work to keep it in good condition. Here are a few of the top ways to maintain your swimming pool throughout the year.

1. Maintain Your Swimming Pool With a Cover

When your swimming pool isn’t in use, keep it covered to prevent leaves and twigs from piling up on the water. With a cover, you won’t have to skim the water for insects or branches each week. Using a cover will also prevent the water from evaporating when the pool isn’t in use, which can reduce your water consumption each year.

Another reason to use a cover is for safety purposes. There’s always the risk of someone falling into the water. Many durable covers are strong enough to prevent someone from having contact with the water if they fall in.

2. Promote Circulation

Stagnant water in the pool can become cloudy, which not only looks unappealing but can also make the pool unsafe to swim in. The pump and filter system should run daily to circulate the water. It can be expensive to keep the pump running 24 hours a day, so run it a few times a day for short periods of time.

3. Clean the Pool

Although you may have gadgets that work to keep the pool clean, you’ll still need to manually clean the water. You’ll need a net skimmer, pool brush, and a pool vacuum. Skim, brush, and vacuum the pool at least once each week, depending on how frequently the pool is used. The pool may need to be cleaned more frequently in stormy weather conditions.

4. Test the pH

Testing the pH of the pool water is an important part of pool maintenance. Corrosion is prone to form if the water is too acidic. Deposits, scaling, and cloudy water are common side effects of water that is too base. A pH of 7.4 is optimal for a swimming pool.

5. Clean the Filters

Keeping the filters clean in your pool will allow them to work more effectively. Filters should be backwashed every 4-6 weeks. Protect yourself by wearing heavy-duty gloves, a mask, and eye protection to avoid contact with the chemicals. Rinse the filters clean before allowing them to air dry.

6. Maintain Your Swimming Pool in the Winter

There are some steps to take after your last swim of the season. This will help the pool stay in better condition and be ready for use when it gets warm again.

  • Make sure the water chemistry is balanced.
  • Remove accessories like skimmer baskets, cleaners, and ladders from the pool.
  • Lower the water level 12 inches below the skimmer.
  • Lubricate o-rings.
  • Add algaecide.
  • Cover for the winter.

With a bit of research and the right tools, you can easily maintain your swimming pool. By keeping it in good condition, you will be able to enjoy it safely.

A.I.M. for Real Estate Inspections provides pool inspections and other home inspection services. Contact us to book an appointment in and around San Antonio.



READ MORE BLOG ARTICLES